Lexmark 35ST001 Manual De Usuario

On
Off

Specify whether or not the wireless network adapter accepts the
automatic IPv6 address configuration entries provided by a router.

Note: On is the factory default setting.

Set the host name.

Note: These settings can be changed only from the Embedded Web
Server.

On
Off

Enable DHCPv6 in the printer.

Note: On is the factory default setting.

Note: This menu is available only in printers connected to an Ethernet network and printers with a wireless network
adapter attached.

To access the menu, navigate to either of the following:

Network/Ports > Standard Network > Standard Network Setup > Wireless

Network/Ports > Network [x] > Network [x] Setup > Wireless

‑Fi Protected Setup (WPS)

Start Push Button Method
Start PIN Method

Establish a wireless network connection and enable network security.

Start Push Button Method connects the printer to a wireless
network when buttons on both the printer and the access point
(wireless router) are pressed within a given period of time.

Start PIN Method connects the printer to a wireless network when
a PIN on the printer is entered into the wireless settings of the
access point.

‑detection

Enable
Disable

Automatically detect the connection method that an access point with
WPS uses—Start Push Button Method or Start PIN Method.

Note: Disable is the factory default setting.

BSS Type

Infrastructure
Ad hoc

Specify the network mode.

Infrastructure is the factory default setting. This lets the printer
access a network using an access point.

Ad hoc configures a wireless connection directly between the
printer and a computer.

802.11b/g
802.11b/g/n

Specify the wireless standard for the wireless network.

Note: The 802.11b/g/n is the factory default setting.

Select an available network for the printer to use.

View the quality of the wireless connection.

Understanding the printer menus

154