Kodak 8650 Manual De Usuario
Setting up the printer
October 1997
2-27
Finally, make a test print. Doing so helps you verify proper printer setup
and operation, and confirms print quality. There are two test images: one
is generated in raster mode, the other in PostScript mode.
and operation, and confirms print quality. There are two test images: one
is generated in raster mode, the other in PostScript mode.
To make a test print:
1. Make sure that READY appears on the display panel.
2. Press Print on the display panel.
It takes less than two minutes to make a test print. While the image is
being processed and printed, the messages PROCESSING: TEST
PRINT and PRINTING appear on the display panel.
being processed and printed, the messages PROCESSING: TEST
PRINT and PRINTING appear on the display panel.
CAUTION:
During printing, the media partially exits the printer
multiple times. Do not pull the print. Wait for the print
to exit completely before touching it.
multiple times. Do not pull the print. Wait for the print
to exit completely before touching it.
The printer expects the loaded media to match the media type specified
using the DEFAULTS:MEDIA option on the display panel. If, for example,
the printer expects paper, and transparency material is loaded, a
mismatch message will appear. If you choose to make the test print
using incorrect media, the print will not have proper color reproduction
for that media type.
using the DEFAULTS:MEDIA option on the display panel. If, for example,
the printer expects paper, and transparency material is loaded, a
mismatch message will appear. If you choose to make the test print
using incorrect media, the print will not have proper color reproduction
for that media type.
What’s next
To get the most from your 8650 Color Printer, you need to install the
printer drivers and export modules you plan to use. Refer to the Driver
Guide and to the Export Module Guide.
printer drivers and export modules you plan to use. Refer to the Driver
Guide and to the Export Module Guide.