Kodak 8650 Manual De Usuario

 

Appendix C Customizing the printer

 

October 1997

C-13

 

To finish up the installation:

1. Grasp the black handles on the back of the printer and slide the 

drawer in about three inches.

2. Reconnect the ribbon cable by pressing it firmly into the connector.

3. Make sure that the plastic clips on each side of the ribbon cable 

are latched.

4. Close the drawer the rest of the way.

5. Replace the five screws that you removed.

6. Plug in the printer and turn it 

 

On

 

.

7. Verify that the Power light is lit on the display panel.