Axis Communications 540+ Manual De Usuario

AXIS 540+/AXIS 560

15

Follow the instructions below to set the IP address using RARP. 

Append the following line to your Ethernet Address table. This is typically 
located in the 

/etc/ethers

 file:

1. Update, if necessary, your host table and alias name databases as required 

by your system.

2. If it is not already running, start the RARP daemon. This is typically 

performed using the 

rarpd -a

 command.

3. Restart the print server to download the IP address.

4. You have now set the IP address of the print server. Continue to 

Auto- IP is a scheme where devices allocate themselves an IP address at 
random from the industry standard subnet of 169.254.x.x. AXIS print servers 
are configured to support Auto-IP by default. See also “Auto-IP Addressing” on 
page 3.

1. Open a Command Prompt and enter the following commands:

2. The host will return 

 

, or a similar message. This 

indicates that the address has been set and that communication is 
established. 

3. Log in to the print server’s Web pages (see 

Server Management, on page 87), select 

Detailed View | TCP/IP and define Default Router and Subnet Mask. Make 
sure you first set 

DHCP, Auto-IP, BOOTP and RARP (...Enabled) to No!

You have now set the IP address of the print server. Continue to “Making 

<Ethernet address> <host name>

00:40:8c:10:00:86 npsname

You have to restart the print server to download the IP address.

arp -s <IP address> <Ethernet address>
ping <IP address>

arp -s 192.168.3.191 00-40-8c-10-00-86
ping 192.168.3.191