Axis Communications 540+ Manual De Usuario

28

AXIS 540+/AXIS 560

See to it that the NetBEUI protocol is installed on your client. Follow the 
procedure below to install Axis Printer Ports from a Windows 2000 
workstation:

1. To start the Add Printer Wizard, select 

Settings | Printers from the Start 

menu and double-click the 

Add Printer icon. Start the installation by 

clicking 

Next.

2. The Wizard asks you to select 

Local printer or Network printer. Select Local 

printer. Click Next.

3. Click 

Create a new port. In the Available Ports dialog, select AXIS Port and 

click 

Next.

4. Select 

NetBIOS/NetBEUI as your choice of network protocol and click OK.

5. Select the AXIS Port you want to add from the list of available ports. The port 

appears as <name>.<port> (Example: AX100086.LP1). The <port> is taken 
from the table below. Click 

OK.

6. Choose the appropriate printer driver for your printer. Click 

Next and proceed 

directly to step 9. It is only necessary to perform steps 7 - 8 if your printer 
does not appear in the list.

 

7. Click the 

Have Disk... button. Insert the printer driver diskette/CD that was 

provided with your printer, select the appropriate diskette/CD drive and click 

OK.

8. Select the printer driver you want to install and click 

Next.

9. Enter an appropriate name for your printer and click 

Next.

10. Choose whether you want to share the printer with other network users and 

click 

Next.

11. Choose whether you want to print a test page, click 

Next and then Finish.

Ports available

Parallel port 1 Parallel port 2

Serial port

AXIS 540+

LP1

—

—

AXIS 560

LP1

LP2

CM1

Even if the desired printer is available in the 

Manufacturers and Printers 

lists, you are advised to use the printer driver provided with the printer. This 
assures you of the latest driver software.