Axis Communications 540+ Manual De Usuario

72

AXIS 540+/AXIS 560

Having performed the basic TCP/IP setup procedures as defined earlier in this 
manual, you are now able to print in interactive mode using PROS, LPR, FTP or 
Reverse Telnet protocols.

However, if you want to integrate the AXIS 540+/AXIS 560 with your host 
spooler, you can use the Axis automatic installation script axinstall. This utility 

software is resident in the print server and can be downloaded to your host 
using FTP, so no disks are required. The axinstall script is also available from 

www.axis.com

Having completed this operation, the printer connected to the print server will 
appear as though it is directly connected to the host printer spooler.

If you intend to use the print server in a multi-protocol environment, refer to 
the chapters pertaining to the respective operating systems in this manual.

To integrate the AXIS 540+/AXIS 560 with the host printer spooler, you can use 
the auto installation script axinstall, resident in the print server. Follow the 

instructions below to install axinstall onto your host using FTP:

1. Login to the print server using the command:

ftp <host name>

 

-or-

ftp <IP address>

2. Enter 

root

 as user id and 

pass

 as password.

3. Download the script using the command:

get axinstall

 

Log out using the command 

quit,

 

bye

 or 

exit

 depending on your FTP version.

Typical FTP session for downloading the axinstall script

> ftp npserver

connected to npserver.

220 AXIS 560 FTP Print Server v6.43 March 23 2003 

ready.

Name (npsserver:thomas): root

331 User name ok, need password

Password: pass 

230 User logged in

ftp> get axinstall

200 PORT command successful.

150 Opening data connection for axinstall 

(192,36,253,4,13,223), (mode ascii).

226 Transfer complete.

local: axinstall remote: axinstall

61187 bytes received in 14 seconds (4.2 kbytes/s)

ftp> bye

221 Goodbye.