Axis Communications 540+ Manual De Usuario

AXIS 540+/AXIS 560

83

AXIS ThinWizard software allows you to manage and upgrade 

multiple Axis 

products. Using a standard Web browser, you can find, install, monitor, 
configure and upgrade your Axis print servers remotely in any TCP/IP network. 
AXIS Thin Wizard 3.0 is Windows 2000 and Windows XP compatible.

AXIS ThinWizard software is available on www.axis.com 
You should only install AXIS ThinWizard on a designated computer on your 
network.

To install, follow the instructions given by the Installation Wizard. During the 
installation, you will be asked to enter a user id and a password — these will be 
used when logging in to AXIS ThinWizard, so please take a note of them.

Follow the instructions below to start AXIS ThinWizard:

1. Make sure that the computer where you installed the AXIS ThinWizard is 

up and running on your network.

2. Start a Web browser on a client in your network.

3. Enter the IP address or the host name of the computer where you installed 

AXIS ThinWizard. (If the server is installed on another port than 80, you must 
enter the port name after the host name or the IP address).

4. The AXIS ThinWizard start page now appears in the Web browser. Enter the 

user id and password you specified during installation and click 

Log in.

5. The AXIS ThinWizard interface appears:

These parameters must be enabled in the print server’s web interface for AXIS ThinWizard to 
function properly:
• FTP_ENB (FTP enabled): click 

• SNMP_ENB (SNMP Enabled): click 

These parameters are enabled by default in the print server.