Siemens 620 Manual De Usuario
Welcome to the SIMATIC Box PC 620
2-9
SIMATIC Box PC 620 Manual
A5E00131465-01
Handling Disks with the LS 240 Drive
Depending on the fitting position, the disks are inserted into the disk drive as
illustrated below:
illustrated below:
Access hole for emergency ejection (only LS240)
Ejector
Ejector
Access LED
Access LED
Figure 2-5 Handling Disks
!
Caution
Risk of loss of data!
When the green access LED of the LS 240 drive is lit, the ejector may not be
Risk of loss of data!
When the green access LED of the LS 240 drive is lit, the ejector may not be
actuated.
LS 240 drives are very sensitive to shocks of a non-permissible level. Shocks
LS 240 drives are very sensitive to shocks of a non-permissible level. Shocks
during operation can lead to damage to the drive or the data carrier. You can find
the permissible values in the technical data in Section B.
Information on the LS240 Disk Drive
Restrictions
P-Tools under STEP 5
Data cannot be edited in PCP/M format on the LS240 drive using P Tools under
STEP 5.
STEP 5.
Notice
When you use the P Tools (for editing PCP/M files) supplied with STEP 5,
When you use the P Tools (for editing PCP/M files) supplied with STEP 5,
remember that these are not fully supported by the Windows 98 and
Windows 2000 operating systems nor by LS240 diskette drives. If you use the
P Tools, we recommend that you use MS-DOS, Windows 3.x or Windows 95 and
standard 1.44 Mbyte floppies.