Graco 3A0415D Manual De Usuario

•

The “TIME” switches 1 and 2 of the 4-way 
code switch in the drive unit match the 
desired discharge period.

•

All components are properly assembled 
and screwed together hand tight.

Turn the rotary switch from the 
OFF position to the ON posi-
tion.

When the red and green LED light up at the 
same time, the lubrication canister is empty 
and should be replaced.

1. Switch the rotary switch 

position from ON to OFF.

2. To disconnect adapter from lubrication 

point, follow pressure relief procedure 
provided on page 4. 

3. Unscrew and completely remove adapter 

(B) from the lubricator. Adapter will be 
reused.

4. Unscrew cover from drive unit.

5. Remove drive unit from the lubrication can-

ister.

6. Remove old battery  pack from drive unit.

•

The battery  pack must be replaced 
every time you change a lubrication 
canister to ensure correct lubricator 
operation.

•

The drive unit and circuit board must 
always be protected from moisture to 
prevent damaging these components. 
Always change the lubrication canister 
in a dry place.

B