Graco 24N815 Manual De Usuario
The information contained in this document is only a recommendation for an automatic lubrication system and is not intended to
replace the installation and maintenance instructions provided by the original equipment manufacturer.
replace the installation and maintenance instructions provided by the original equipment manufacturer.
Mobile Lubrication Library
Excavators
Suggested automated lubrication system layout for 13-36 ton excavators.
Kit No.: 24N815, Excavator, G3, USP, 19PT
Maximum System Working Pressure: 3000 psi (206 bar, 20.7 MPa)
Important Safety Information
Read all warnings and instructions in all
related manuals. Save all instructions.
related manuals. Save all instructions.
Related Manuals
Manual No.
Manual Title
3A0414
G3 Pump
3A0525
Pressure Relief Valve
3A0528
Remote Manual Run
3A0860
USP Valves
Fluid leaks from incorrectly installed or ruptured compo-
nents, and/or failure to verify the components are properly
installed and tested, can result in serious injury such as
fluid spraying in the eyes or on skin and fluid injection, or
equipment damage.
nents, and/or failure to verify the components are properly
installed and tested, can result in serious injury such as
fluid spraying in the eyes or on skin and fluid injection, or
equipment damage.
To prevent injury or equipment damage, installation must
be done by a professional and tested prior to use. Consult
Parker literature for specific hose assembly instructions.
These instructions are available from your Parker represen-
tative or at www.Parker.com/pdf.
be done by a professional and tested prior to use. Consult
Parker literature for specific hose assembly instructions.
These instructions are available from your Parker represen-
tative or at www.Parker.com/pdf.
333501B