Cabletron Systems 1082 Manual De Usuario

C o n f i g u r a t i o n V i e w s

E t h e r n e t B a s e d C o n f i g u r a t i o n

S p e c t r u m E n t e r p r i s e M a n a g e r

Page 58

S m a r t S w i t c h 6 0 0 0

Allows you to enable or disable detection of Error 
Alarms. Possible menu selections are: Enable and 
Disable.

Displays the threshold value for the percentage of 
errors per good packet that may occur within the 
Timebase before generating an error alarm. This 
value is user-configurable from 1 to 100.

This area of the Repeater Configuration view 
provides a series of buttons that let you select the 
types of errors to include in the error sum. The 
selectable error types are as described below.

Packets with bad Cyclical Redundancy Checks.

A packet that is one byte less than the standard 
Ethernet frame of 64 bytes (not including 
preamble).

Collisions out of the standard window due to a 
network problem.

Misaligned packets detected.

The number of times the module ran out of 
resources (i.e., lack of buffer space) and could not 
accept packets.

Packets received that exceed 1518 bytes (not 
including preamble).

This view provides port configuration information 
for GPIM models. This view also shares fields with 
the 

and the shared fields are covered there. The fields 
below detail the device specific information found 
with this view.

Indicates whether Auto-Negotiation is enabled for 
a specific port. If Auto-Negotiation is disabled the 
port will revert to the speed, duplex, and flow 
control settings specified by their associated 
leaves in the Flow Control groups.

Indicates whether the remote end of the link is 
operating in Auto-Negotiation signaling or not.