ICP DAS USA SAGP-845EV Manual De Usuario
58
Appendix C. How to Upgrade a
New BIOS
<Note> Before flashing BIOS , please enable the item
“FLASH BIOS” in BIOS setting.
The user can install an upgrade BIOS for the
“FLASH BIOS” in BIOS setting.
The user can install an upgrade BIOS for the
SAGP-845EV
download from the manufacturer’s web site
(
(
http://www.ieiworld.com
). New BIOS may provide support for new
peripherals ,improvements in performance or fixes to addressed
known bugs.
BIOS Update Procedure:
1. Make a boot disk. Go to the DOS command prompt in MS-DOS
known bugs.
BIOS Update Procedure:
1. Make a boot disk. Go to the DOS command prompt in MS-DOS
or Windows 9x and, with an available floppy disk in "A", type
"format A: /s" That will format the floppy and transfer the
needed system files to it.
"format A: /s" That will format the floppy and transfer the
needed system files to it.
NOTES:
A. This procedure will erase any prior data on that floppy,
so please Proceed accordingly.
B. Typically four files will be transferred, only
COMMAND.COM being visible when running a simple
directory listing.
directory listing.
C. Please leave the diskette UN-write protected for the
balance of this procedure.
2. Download the BIOS upgrade file and awdflash.exe utility from a
ICP web site to a temp directory on your hard drive, or directly
to the floppy you made in step 1..
to the floppy you made in step 1..
3. Copy ( BIOS file and awdflash.exe )two files to the boot floppy.