Cisco Systems 3130 Manual De Usuario
9-15
Cisco Catalyst Blade Switch 3130 for Dell Software Configuration Guide
OL-13270-01
Chapter 9 Configuring IEEE 802.1x Port-Based Authentication
Understanding IEEE 802.1x Port-Based Authentication
After a port moves to the restricted VLAN, a simulated EAP success message is sent to the client. This
prevents clients from indefinitely attempting authentication. Some clients (for example, devices running
Windows XP) cannot implement DHCP without EAP success.
prevents clients from indefinitely attempting authentication. Some clients (for example, devices running
Windows XP) cannot implement DHCP without EAP success.
Restricted VLANs are supported only on IEEE 802.1x ports in single-host mode and on Layer 2 ports.
You can configure any active VLAN except an RSPAN VLAN, a primary private VLAN, or a voice
VLAN as an IEEE 802.1x restricted VLAN. The restricted VLAN feature is not supported on internal
VLANs (routed ports) or trunk ports; it is supported only on access ports.
VLAN as an IEEE 802.1x restricted VLAN. The restricted VLAN feature is not supported on internal
VLANs (routed ports) or trunk ports; it is supported only on access ports.
This feature works with port security. As soon as the port is authorized, a MAC address is provided to
port security. If port security does not permit the MAC address or if the maximum secure address count
is reached, the port becomes unauthorized and error disabled.
port security. If port security does not permit the MAC address or if the maximum secure address count
is reached, the port becomes unauthorized and error disabled.
Other port security features such as dynamic ARP Inspection, DHCP snooping, and IP source guard can
be configured independently on a restricted VLAN.
be configured independently on a restricted VLAN.
For more information, see the
Using IEEE 802.1x Authentication with Inaccessible Authentication Bypass
When the switch cannot reach the configured RADIUS servers and hosts cannot be authenticated, you
can configure the switch to allow network access to the hosts connected to critical ports. A critical port
is enabled for the inaccessible authentication bypass feature, also referred to as critical authentication
or the AAA fail policy.
can configure the switch to allow network access to the hosts connected to critical ports. A critical port
is enabled for the inaccessible authentication bypass feature, also referred to as critical authentication
or the AAA fail policy.
When this feature is enabled, the switch checks the status of the configured RADIUS servers whenever
the switch tries to authenticate a host connected to a critical port. If a server is available, the switch can
authenticate the host. However, if all the RADIUS servers are unavailable, the switch grants network
access to the host and puts the port in the critical-authentication state, which is a special case of the
authentication state.
the switch tries to authenticate a host connected to a critical port. If a server is available, the switch can
authenticate the host. However, if all the RADIUS servers are unavailable, the switch grants network
access to the host and puts the port in the critical-authentication state, which is a special case of the
authentication state.
The behavior of the inaccessible authentication bypass feature depends on the authorization state of the
port:
port:
•
If the port is unauthorized when a host connected to a critical port tries to authenticate and all servers
are unavailable, the switch puts the port in the critical-authentication state in the
RADIUS-configured or user-specified access VLAN.
are unavailable, the switch puts the port in the critical-authentication state in the
RADIUS-configured or user-specified access VLAN.
•
If the port is already authorized and re-authentication occurs, the switch puts the critical port in the
critical-authentication state in the current VLAN, which might be the one previously assigned by
the RADIUS server.
critical-authentication state in the current VLAN, which might be the one previously assigned by
the RADIUS server.
•
If the RADIUS server becomes unavailable during an authentication exchange, the current
exchanges times out, and the switch puts the critical port in the critical-authentication state during
the next authentication attempt.
exchanges times out, and the switch puts the critical port in the critical-authentication state during
the next authentication attempt.
When a RADIUS server that can authenticate the host is available, all critical ports in the
critical-authentication state are automatically re-authenticated.
critical-authentication state are automatically re-authenticated.