Cisco Systems 3560 Manual De Usuario

Beginning in privileged EXEC mode, follow these steps to specify a different configuration filename:

To return to the default setting, use the no boot config-file global configuration command.

By default, the switch automatically boots up; however, you can configure it to manually boot up.

Beginning in privileged EXEC mode, follow these steps to configure the switch to manually boot up 
during the next boot cycle:

To disable manual booting, use the no boot manual global configuration command.

Enter global configuration mode.

boot config-file flash:/file-url

Specify the configuration file to load during the next boot-up 
cycle.

For file-url, specify the path (directory) and the configuration 
filename.

Filenames and directory names are case sensitive.

Return to privileged EXEC mode.

Verify your entries.

The boot config-file global configuration command changes the 
setting of the CONFIG_FILE environment variable.

(Optional) Save your entries in the configuration file.

Enter global configuration mode.

Enable the switch to manually boot up during the next boot cycle.

Return to privileged EXEC mode.

Verify your entries.

The boot manual global command changes the setting of the 
MANUAL_BOOT environment variable. 

The next time you reboot the system, the switch is in boot loader 
mode, shown by the switch: prompt. To boot up the system, use the 
boot filesystem:/file-url boot loader command. 

For filesystem:, use flash: for the system board flash device.

For file-url, specify the path (directory) and the name of the 
bootable image.

Filenames and directory names are case sensitive.

(Optional) Save your entries in the configuration file.