Cisco Systems 3560 Manual De Usuario

Switch# configure terminal

Enter configuration commands, one per line.  End with CNTL/Z.

Switch(config)# energywise domain cisco secret cisco protocol udp port 43440 ip 2.2.4.30 

Switch(config)# energywise importance 50

Switch(config)# energywise keywords lab1,devlab 

Switch(config)# energywise name LabSwitch

Switch(config)# energywise neighbor TG3560G-21 43440

Switch(config)# energywise role role.labaccess

Switch(config)# end

Switch# show energywise domain 

Name      : TG3560G-41

Domain    : cisco

Protocol  : udp

IP        : 2.2.2.21

Port      : 43440

Switch# show energywise neighbors 

Capability Codes: R - Router, T - Trans Bridge, B - Source Route Bridge

                  S - Switch, H - Host, I - IGMP, r - Repeater, P - Phone

Id   Neighbor Name                 Ip:Port                 Prot   Capability

--   -------------                 -------                 ----   ----------

1    TG3560G-21                    2.2.2.21:43440          udp    S I

2    TG3560G-31                    2.2.4.31:43440          static S I

3    TG3560G-22                    2.2.2.22:43440          cdp    S I

energywise level 0 recurrence importance 
importance at minute hour day_of_month month 
day_of_week

(Optional) Schedule the power-off recurrence.

importance importance—Set the importance of the port in 
the domain. The range is from 1 to 100. The default is 1.

minute—The range is from 0 to 59. Use * for the wildcard.

hour—The range is from 0 to 23. Use * for the wildcard.

day_of_month—The range is from 1 to 31. Use * for the 
wildcard.

month—The range is from 1 (January) to 12 (December). Use 
* for the wildcard.

day_of_week—The range is from 0 (Sunday) to 6 (Saturday). 
Use * for the wildcard.

The specified time is the local time based on the 
PoE-entity time zone. 

Return to privileged EXEC mode.

Verify your entries.

(Optional) Save your entries in the configuration file.