Cisco Systems 3560 Manual De Usuario

Descargar
Página de 1288
 
B-26
Catalyst 3560 Switch Software Configuration Guide
OL-8553-06
Appendix B      Working with the Cisco IOS File System, Configuration Files, and Software Images
Working with Software Images
  •
Ensure that the switch has a route to the TFTP server. The switch and the TFTP server must be in 
the same subnetwork if you do not have a router to route traffic between subnets. Check connectivity 
to the TFTP server by using the ping command.
  •
Ensure that the image to be downloaded is in the correct directory on the TFTP server (usually 
/tftpboot on a UNIX workstation).
  •
For download operations, ensure that the permissions on the file are set correctly. The permission 
on the file should be world-read.
  •
Before uploading the image file, you might need to create an empty file on the TFTP server. To 
create an empty file, enter the touch filename command, where filename is the name of the file you 
will use when uploading the image to the server.
  •
During upload operations, if you are overwriting an existing file (including an empty file, if you had 
to create one) on the server, ensure that the permissions on the file are set correctly. Permissions on 
the file should be world-write.
Downloading an Image File By Using TFTP
You can download a new image file and replace the current image or keep the current image. 
Beginning in privileged EXEC mode, follow Steps 1 through 3 to download a new image from a TFTP 
server and overwrite the existing image. To keep the current image, go to Step 3.
Command
Purpose
Step 1
Copy the image to the appropriate TFTP directory on the 
workstation. Make sure that the TFTP server is properly 
configured; see the 
Step 2
Log into the switch through the console port or a Telnet session.