Cisco Systems 3560 Manual De Usuario
5-7
Catalyst 3560 Switch Software Configuration Guide
OL-8553-06
Chapter 5 Configuring Cisco IOS Configuration Engine
Configuring Cisco IOS Agents
Note
For more information about running the setup program and creating templates on the Configuration
Engine, see the Cisco Configuration Engine Installation and Setup Guide, 1.5 for Linux at
Engine, see the Cisco Configuration Engine Installation and Setup Guide, 1.5 for Linux at
Enabling the CNS Event Agent
Note
You must enable the CNS event agent on the switch before you enable the CNS configuration agent.
DHCP server
•
IP address assignment
•
TFTP server IP address
•
Path to bootstrap configuration file on the TFTP server
•
Default gateway IP address
TFTP server
•
A bootstrap configuration file that includes the CNS
configuration commands that enable the switch to
communicate with the Configuration Engine
configuration commands that enable the switch to
communicate with the Configuration Engine
•
The switch configured to use either the switch MAC address
or the serial number (instead of the default hostname) to
generate the ConfigID and EventID
or the serial number (instead of the default hostname) to
generate the ConfigID and EventID
•
The CNS event agent configured to push the configuration file
to the switch
to the switch
CNS Configuration Engine
One or more templates for each type of device, with the ConfigID
of the device mapped to the template.
of the device mapped to the template.
Table 5-1
Prerequisites for Enabling Automatic Configuration (continued)
Device
Required Configuration