Cisco Systems 3560 Manual De Usuario
10-30
Catalyst 3560 Switch Software Configuration Guide
OL-8553-06
Chapter 10 Configuring IEEE 802.1x Port-Based Authentication
Configuring 802.1x Authentication
•
(optional)
•
(optional)
•
(optional)
•
(optional)
•
(optional)
•
•
•
•
(optional)
•
(optional)
•
(optional)
•
(optional)
Default 802.1x Authentication Configuration
shows the default 802.1x authentication configuration.
Table 10-4
Default 802.1x Authentication Configuration
Feature
Default Setting
Switch 802.1x enable state
Disabled.
Per-port 802.1x enable state
Disabled (force-authorized).
The port sends and receives normal traffic without 802.1x-based
authentication of the client.
authentication of the client.
AAA
Disabled.
RADIUS server
•
IP address
•
UDP authentication port
•
Key
•
None specified.
•
1812.
•
None specified.
Host mode
Single-host mode.
Control direction
Bidirectional control.
Periodic re-authentication
Disabled.
Number of seconds between
re-authentication attempts
re-authentication attempts
3600 seconds.
Re-authentication number
2 times (number of times that the switch restarts the authentication process
before the port changes to the unauthorized state).
before the port changes to the unauthorized state).
Quiet period
60 seconds (number of seconds that the switch remains in the quiet state
following a failed authentication exchange with the client).
following a failed authentication exchange with the client).
Retransmission time
30 seconds (number of seconds that the switch should wait for a response to an
EAP request/identity frame from the client before resending the request).
EAP request/identity frame from the client before resending the request).