Cisco Systems 3560 Manual De Usuario
11-30
Catalyst 3560 Switch Software Configuration Guide
OL-8553-06
Chapter 11 Configuring Interface Characteristics
Monitoring and Maintaining the Interfaces
Clearing and Resetting Interfaces and Counters
lists the privileged EXEC mode clear commands that you can use to clear counters and reset
interfaces.
To clear the interface counters shown by the show interfaces privileged EXEC command, use the clear
counters privileged EXEC command. The clear counters command clears all current interface counters
from the interface unless you specify optional arguments that clear only a specific interface type from a
specific interface number.
counters privileged EXEC command. The clear counters command clears all current interface counters
from the interface unless you specify optional arguments that clear only a specific interface type from a
specific interface number.
show interfaces [interface-id] description
(Optional) Display the description configured on an interface or all
interfaces and the interface status.
interfaces and the interface status.
show ip interface [interface-id]
(Optional) Display the usability status of all interfaces configured for
IP routing or the specified interface.
IP routing or the specified interface.
show interface [interface-id] stats
(Optional) Display the input and output packets by the switching path
for the interface.
for the interface.
show interfaces tengigabitethernet interface-id
detail
detail
(Optional) Display status of a connected ten gigabit module, such as
temperature and alarm status.
temperature and alarm status.
show interfaces tengigabitethernet interface-id
properties detail
properties detail
(Optional) Display the speed and duplex settings of a connected
ten-gigabit module
ten-gigabit module
show interfaces transceiver properties
(Optional) Display speed, duplex, and inline power settings on the
interface.
interface.
show interfaces transceiver detail
(Optional) Display temperature, voltage, or amount of current on the
interface.
interface.
show interfaces [interface-id] [{transceiver
properties | detail}] module number]
properties | detail}] module number]
Display physical and operational status about an SFP module.
show running-config interface [interface-id]
Display the running configuration in RAM for the interface.
show version
Display the hardware configuration, software version, the names and
sources of configuration files, and the boot images.
sources of configuration files, and the boot images.
show controllers ethernet-controller interface-id
phy
phy
Display the operational state of the auto-MDIX feature on the
interface.
interface.
show power inline [interface-id]
Display PoE status for a switch or for an interface.
Table 11-4
Show Commands for Interfaces (continued)
Command
Purpose
Table 11-5
Clear Commands for Interfaces
Command
Purpose
clear counters [interface-id]
Clear interface counters.
clear interface interface-id
Reset the hardware logic on an interface.
clear line [number | console 0 | vty number]
Reset the hardware logic on an asynchronous serial line.