Cisco Systems 3560 Manual De Usuario
26-4
Catalyst 3560 Switch Software Configuration Guide
OL-8553-06
Chapter 26 Configuring LLDP, LLDP-MED, and Wired Location Service
Configuring LLDP, LLDP-MED, and Wired Location Service
•
Device category is specified as a wired station
•
State is specified as delete
•
Serial number, UDI
•
Time in seconds since the switch detected the disassociation
When the switch shuts down, it sends an attachment notification with the state delete and the IP address
before closing the NMSP connection to the MSE. The MSE interprets this notification as disassociation
for all the wired clients associated with the switch.
before closing the NMSP connection to the MSE. The MSE interprets this notification as disassociation
for all the wired clients associated with the switch.
If you change a location address on the switch, the switch sends an NMSP location notification message
that identifies the affected ports and the changed address information.
that identifies the affected ports and the changed address information.
Configuring LLDP, LLDP-MED, and Wired Location Service
•
•
•
•
•
•
•
Default LLDP Configuration
Table 26-1
Default LLDP Configuration
Feature
Default Setting
LLDP global state
Disabled
LLDP holdtime (before discarding)
120 seconds
LLDP timer (packet update frequency)
30 seconds
LLDP reinitialization delay
2 seconds
LLDP tlv-select
Disabled to send and receive all TLVs
LLDP interface state
Disabled
LLDP receive
Disabled
LLDP transmit
Disabled
LLDP med-tlv-select
Disabled to send all LLDP-MED TLVs