Cisco Systems 3560 Manual De Usuario

configuration command. The default is to send two queries. The switch also generates MLDv1 global 
Done messages with valid link-local IPv6 source addresses when the switch becomes the STP root in the 
VLAN or when it is configured by the user. This is same as done in IGMP snooping.

These sections describe how to configure IPv6 MLD snooping:

 shows the default MLD snooping configuration.

MLD snooping (Global)

Disabled.

MLD snooping (per VLAN)

Enabled. MLD snooping must be globally enabled for VLAN 
MLD snooping to take place.

IPv6 Multicast addresses

None configured.

IPv6 Multicast router ports

None configured.

MLD snooping Immediate Leave

Disabled.

MLD snooping robustness variable

Global: 2; Per VLAN: 0.

The VLAN value overrides the global setting. When the 
VLAN value is 0, the VLAN uses the global count.

Last listener query count

Global: 2; Per VLAN: 0.

The VLAN value overrides the global setting. When the 
VLAN value is 0, the VLAN uses the global count.

Last listener query interval

Global: 1000 (1 second); VLAN: 0.

The VLAN value overrides the global setting. When the 
VLAN value is 0, the VLAN uses the global interval.

TCN query solicit

Disabled.

TCN query count

2.

MLD listener suppression

Enabled.