Cisco Systems 3560 Manual De Usuario

You can display information about all configured access lists, all IPv6 access lists, or a specific access 
list by using one or more of the privileged EXEC commands in 

.

This is an example of the output from the show access-lists privileged EXEC command. The output 
shows all access lists that are configured on the switch.

Switch #show access-lists 

Extended IP access list hello

    10 permit ip any any

IPv6 access list ipv6

    permit ipv6 any any sequence 10

This is an example of the output from the show ipv6 access-lists privileged EXEC command. The output 
shows only IPv6 access lists configured on the switch.

Switch# show ipv6 access-list

IPv6 access list inbound

    permit tcp any any eq bgp (8 matches) sequence 10

    permit tcp any any eq telnet (15 matches) sequence 20

    permit udp any any sequence 30

IPv6 access list outbound

    deny udp any any sequence 10

    deny tcp any any eq telnet sequence 20

Display all access lists configured on the switch.

show ipv6 access-list [access-list-name]

Display all configured IPv6 access list or the access list specified by 
name.