Cisco Systems 12000 Series Manual De Usuario

To display hardware information on the Cisco 12000 series Gigabit Switch Routers (GSRs), use the 
show gsr command in EXEC mode.

show gsr [chassis-info [details]]

EXEC

Use this command to determine the type of hardware installed in your Cisco 12000 series GSR router.

The following is sample output from the show gsr command for a Cisco 12012 router. This command 
shows the type and state of the card installed in the slot.

Router# show gsr 

Slot 0  type  = Route Processor 

        state = IOS Running  MASTER

Slot 7  type  = 1 Port Packet Over SONET OC-12c/STM-4c 

        state = Card Powered

Slot 16 type  = Clock Scheduler Card 

        state = Card Powered  PRIMARY CLOCK

The following is sample output from the show gsr chassis-info command for a Cisco 12012 router:

Router# show gsr chassis-info 

Backplane NVRAM [version 0x20] Contents - 

  Chassis: type 12012 Fab Ver: 1

    Chassis S/N: ZQ24CS3WT86MGVHL

  PCA: 800-3015-1  rev: A0  dev: 257  HW ver: 1.0

    Backplane S/N: A109EXPR75FUNYJK

  MAC Addr: base 0000.EAB2.34FF  block size: 1024

  RMA Number: 0x5F-0x2D-0x44  code: 0x01  hist: 0x1A

(Optional) Displays backplane NVRAM information.

(Optional) In addition to the information displayed, this option includes 
hexadecimal output of the backplane NVRAM information.

11.2GS

This command was introduced to support the Cisco 12000 series GSRs.

12.2(33)SRA

This command was integrated into Cisco IOS Release 12.2(33)SRA.