Compaq 2724 Manual De Usuario
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3-5
Compaq Netelligent 2724/2824 Dual-Speed Hub User Guide
Writer: Chris Seiter Project: Installing the Hub Comments: 299440-001
File Name:2824_3.DOC Last Saved On:6/26/97 11:00 AM
Connecting Cable
Each RJ-45 port on the hub can accept a standard 8-wire twisted-pair (UTP)
cable that ends with RJ-45 connectors. This type of cable can be up to 100
meters (328 feet) in length.
cable that ends with RJ-45 connectors. This type of cable can be up to 100
meters (328 feet) in length.
A 100Base-FX port on a SUM can accept multi-mode 62.5/125 to 100/150
micron fiber cable that ends with fiber SC-type connectors. This type of cable
can be up to 2 Km in length at full-duplex operation.
micron fiber cable that ends with fiber SC-type connectors. This type of cable
can be up to 2 Km in length at full-duplex operation.
To attach the cable, plug one of the cable connectors into the selected port on
the hub. Connect the other end of the cable to the corresponding port on a
10Base-T, 100Base-TX, or 100Base-FX workstation (if you installed a
100Base-FX SUM).
the hub. Connect the other end of the cable to the corresponding port on a
10Base-T, 100Base-TX, or 100Base-FX workstation (if you installed a
100Base-FX SUM).
Figure 3- 5. Connecting Twisted-Pair Cable to an RJ-45 Port