Siemens 6ED1050-1AA00-0BE8 Manual De Usuario

 

LOGO! functions 

 

4.4 Special functions list - SF 

LOGO! 
Manual, 04/2011, A5E03556174-01 

187

 

Days of the week   

The prefix "D=" (Day) has the following meaning: 
●  M: Monday 
●  T: Tuesday 
●  W: Wednesday 
●  T: Thursday 
●  F: Friday 
●  S: Saturday 
●  S: Sunday 
Uppercase letters indicate a specific day of the week. A "-" indicates no selection for the day 

of the week. 

On-/Off-times    

Any time between 00:00 h and 23:59 h is possible. You can also configure the on time to be 

a pulse signal. The timer block will be activated at the specified time for one cycle and then 

the output is reset. 

- -:- - means: No on-/off-times set. 

Setting the weekly timer    

To set the on-/off-times:  
1.  Move the cursor to one of the Cam parameters of the timer (e.g. No1). 
2.  Press OK. LOGO! opens the Cam parameter assignment screen form. The cursor is 

positioned on the day of the week. 

3.  Press   and   to select one or several days of the week. 
4.  Press   to move the cursor to the first position of the on-time. 
5.  Set the on-time. 

Modify the value at the respective position, using the keys   and  . Move to the cursor to 

the various positions, using the keys   and  . At the first position, you can only select the 

value - -:- -  

(- -:- - means: No on-/off-times set). 

6.  Press   to move the cursor to the first position of the off-time. 
7.  Set the off-time (in same way as in step 5). 
8.  Confirm your entries with OK. 

The cursor is now positioned on the No2 parameter (Cam2) and you can configure a 

further cam. 

 

 

Note 
For information on timer accuracy, refer to the technical data and to the topic "Time 

response (Page 151)".