Siemens 6ED1050-1AA00-0BE8 Manual De Usuario

 

Applicable cards 

 

8.2 Inserting and removing the card from LOGO! 

LOGO! 
Manual, 04/2011, A5E03556174-01 

307

 

8.2 

Inserting and removing the card from LOGO! 

When you remove a LOGO! memory card, a combined memory/battery card, or an SD card 

that contains a circuit program with copy protection attributes, note the following: The circuit 

program stored on the card can only be executed if the card remains inserted during system 

runtime. 
After you have removed the card, LOGO! outputs the message 'No Program'. A removal of 

the card during RUN will lead to impermissible operating states.  
Always heed the following warning: 

 

WARNING 

 

Do not touch the open slot of the memory card or SD card with your fingers or with a 

metallic or conductive object. Death or personal injury may result.  
The memory card/SD card socket might be under voltage if the polarity is accidentally 

reversed at L1 and N. 
The memory card, battery card, or combined memory/battery card must only be removed 

by qualified personnel using the directions below.  

 

Removing the memory card, battery card or combined memory/battery card 

To remove the memory card, carefully insert a screwdriver with a 3-mm blade into the 

groove on the upper end of the card, and lever the module partially out of the slot. You can 

now remove the memory card.