Siemens 6ED1050-1AA00-0BE8 Manual De Usuario

Applicable cards 

 

8.3 Copying data from LOGO! to the card 

 

LOGO! 

310

 

Manual, 04/2011, A5E03556174-01 

Copying data from LOGO! 0BA7 to the SD card automatically 

LOGO!Soft Comfort V7.0 provides an option for automatically copying the circuit program to 

the SD card when transferring the circuit program to LOGO! 0BA7. This option is available in 

the dialog for PC->LOGO! transfer. If you select this option, the circuit program is transferred 

to LOGO! 0BA7 and then automatically copied from LOGO! 0BA7 to the SD card.  

 

 

Note 
To successfully copy the circuit program from LOGO! 0BA7 to the SD card, make sure that 

the free memory space available on the SD card is at least 65 Kbytes.  

 

Generating the data log on the SD card 

If your circuit program in LOGO! 0BA7 includes a Data Log function block configured from 

LOGO!Soft Comfort, the data log can be saved in your LOGO! or on the SD card. If there is 

an SD card inserted into the slot of your LOGO! 0BA7, when LOGO! changes from STOP to 

RUN, it attempts to copy the data log to the SD card; otherwise, the data log is saved in 

LOGO!. At every STOP to RUN transition, LOGO! determines the destination of the data log 

storage.  
If the data log is copied to the SD card, it is saved by default as .CSV file format, which you 

can then open from a PC. Each line in the .CSV file includes a time stamp, the function block 

number and the actual values recorded.  

 

 

Note 
When LOGO! with an inserted SD card is in STOP mode, you can upload the most recent 

data log file on the SD card to LOGO!Soft Comfort using a transfer menu command in 

LOGO!Soft Comfort. For more information about the data log uploading command, refer to 

the online help for LOGO!Soft Comfort.