Siemens 6ED1050-1AA00-0BE8 Manual De Usuario
Technical data
A.7 Technical data: LOGO! DM8 24R and LOGO! DM16 24R
LOGO!
Manual, 04/2011, A5E03556174-01
Manual, 04/2011, A5E03556174-01
333
LOGO! DM8 24R
LOGO! DM16 24R
Continuous current I
th
max. 5 A per relay
max. 5 A per relay
Surge current
max. 30 A
max. 30 A
Incandescent lamp load (25000
switching cycles) at
1000 W
1000 W
Fluorescent tubes with ballast
(25000 switching cycles)
10 x 58 W
10 x 58 W
Fluorescent tubes,
conventionally compensated
(25000 switching cycles)
1 x 58 W
1 x 58 W
Fluorescent tubes,
uncompensated (25000
switching cycles)
10 x 58 W
10 x 58 W
Derating
none; across the entire
temperature range
none; across the entire
temperature range
Short circuit-proof cos 1
Power protection B16, 600A
Power protection B16, 600A
Short circuit-proof cos 0.5 to 0.7 Power protection B16, 900A
Power protection B16, 900A
Parallel output circuits for power
increase
Not permitted
Not permitted
Protection of output relay (if
desired)
max. 16 A,
characteristic B16
max. 16 A,
characteristic B16
Switching rate
Mechanical
Mechanical
10 Hz
10 Hz
Ohmic load/lamp load
2 Hz
2 Hz
Inductive load
0.5 Hz
0.5 Hz
Notice: For fluorescent lamps with capacitors, the technical data of fluorescent lamp ballasts
must also be considered. If the maximum allowed surge current is exceeded, fluorescent
lamps must be switched with appropriate contactor relays.
The data was determined with the following devices:
The data was determined with the following devices:
Siemens fluorescent tubes 58W VVG 5LZ 583 3-1 uncompensated.
Siemens fluorescent tubes 58W VVG 5LZ 583 3-1 parallel compensated with 7μF.
Siemens fluorescent tubes 58W VVG 5LZ 501 1-1N with ballast.