Siemens 6ED1050-1AA00-0BE8 Manual De Usuario

Preface

LOGO!
Manual, 04/2011, A5E03556174-01

● Support of configuration of elements connected to UDFs (User-Defined Functions)

LOGO!Soft Comfort V7.0 provides a new circuit program editor - the UDF editor. Circuit

programs created in the UDF editor can be saved as individual UDF blocks for use in an

existing or a new circuit program in LOGO!Soft Comfort. A UDF block is a preconfigured

circuit program that you create. If the circuit program in your LOGO! 0BA7 contains a

UDF block, you can edit the elements connected to this UDF block.

● Support of data logging

You can configure the Data Log function only from LOGO!Soft Comfort V7.0. The Data

Log is used to record actual values of digital and analog I/O, digital and analog flags, and

function blocks. If the circuit program in the LOGO! 0BA7 contains the Data Log block,

you can configure the elements connected to it from the LOGO! 0BA7. You can select to

store the data log either in the LOGO! 0BA7 or on an SD card. You can also save the

data log to a .CSV file on your PC and open it with Microsoft Excel or with a text editor.

● Extended real-time clock backup time

LOGO! 0BA7 has a built-in real-time clock that supports a typical backup time of 20 days.

● More connectors and memory space for the creation of the circuit program

Four new connectors that represent network digital inputs/outputs and network analog

inputs/outputs are available in a LOGO! 0BA7 if you have previously configured them

from LOGO!Soft Comfort V7.0. In addition, you can now have up to 16 analog flags, 64

open connectors, 32 shift register bits, and a maximum program memory of 8400 bytes

for up to 400 function blocks in you circuit program.

● New special function blocks

Five new special function blocks are available: Astronomical Clock, Stopwatch, Analog

Filter, Max/Min, and Average Value.

New features of the LOGO! 0BA6 device series

The following features were new for the LOGO! 0BA6 devices:
● A new expansion module named LOGO! AM2 RTD is commercially available. The

module is equipped with two analog inputs for connection to PT100 and/or PT1000

sensors with the default temperature coefficient of α = 0.003850 for both sensor types.

The LOGO! AM2 PT100 expansion module, however, only supports PT100 sensors.

● The LOGO! AM2 RTD module can automatically recognize the sensor type. It is thus

unnecessary for you to make any configuration or setting to achieve this.

● Two new LOGO! versions LOGO! 24C and LOGO! 24Co (each with a built-in real-time

clock) are commercially available.

● The LOGO! TD (Text Display) provides an additional display device for messages, and

contains four cursor keys and four functions keys that can be used in the circuit program.

● An additional password protection function is available in the LOGO! TD (version ES4 or

later) and can only be enabled when the LOGO! TD is used together with a LOGO! Base

Module (version ES4 or later).

● The new LOGO! Battery Card and the LOGO! Combined Memory/Battery Card provide

up to two years of backup time for the real–time clock. The new LOGO! Memory Card and

the Combined Memory/Battery Card provide 32 Kbytes memory space.