Siemens SCALANCE X-200 Manual De Usuario

 

Configuration / diagnostics using remote mechanisms 

 

6.3 Configuration using Web Based Management (WBM) and Command Line Interface (CLI) 

SCALANCE X-200 
Operating Instructions, 12/2011, A5E00349864-19 

197

 

6.3.5.19 

The "Agent SNMP Trap Config" WBM menu 

Agent Trap Configuration - SNMP Traps for Alarm Events 

If an alarm event occurs, the IE Switch X-200 can send traps (alarm frames) to up to two 

different (network management) stations at the same time. Traps are sent only for events 

specified in the Agent Event Configuration menu. 

 

Figure 6-24  "Agent Trap Configuration" dialog 

IP Address 

Here, you enter the addresses of the stations to which the IE Switch X-200 will send traps. 
Enable Trap 

Click on the check box next to the IP addresses to enable the sending of traps to the 

corresponding stations.