Sony DVS-9000 Manual De Usuario

209

C:\WINNT\Profiles\Administrator\Desktop\WORK_08_21\370467401
DVS9000WW\01GB06C04-WW.fm

Key Setting Operations Using Menus

  Chapter 4 

K

e

ys

DVS-9000/9000SF

3-704-674-01 (1)

To select key fill and key source for key 1 on the M/E-1 bank, use the following 
procedure.

In the M/E-1>Key1 menu, select HF1 ‘Type.’

The Type menu appears.

In the <Key Fill> group, select either of the following for use as key fill.

Key Bus: signal selected on the key 1 fill bus
Matte: signal from the dedicated color matte generator

If you selected [Key Bus] in step 

, select the key fill signal on the key row 

in the cross-point control block.

To select key fill for key 3 or key 4 in the cross-point control block, press 
the key delegation button [KEY3] or [KEY4], turning it on, to allocate the 
key row to the key 3 fill bus or key 4 fill bus, then press the desired cross-
point button.

If you selected [Matte] in step 

, in the same Type menu, press the [Matte 

Adjust] button to display the Matte Adjust menu, then adjust the single-
color or two-color combination color matte. Select whether to use a single-
color matte or a two-color combination in the <Fill Matte> group.

Flat Color: Adjust color 1 with the following parameters.

Mix Color: Carry out a color mix. Adjust color 1 and color 2, and select a 

mix pattern (see the next section).

In the <Key Source> group, specify the key source selection mode.

Self: The key fill bus signal is automatically selected as the key source.

When the key type is selected as chroma key, select [Self].

4

Hue

Hue offset amount

−

180.00 to +180.00

1

Luminance

Luminance

0.00 to 100.00

2

Saturation

Saturation

0.00 to 100.00

3

Hue

Hue

0.00 to 359.99