Alloy Computer Products RNS8 Manual De Usuario

 

 

 

Follow the steps below to install the RNS5/8 with the wall mounting plate. 

1.  To remove the DIN-Rail clip from the RNS5/8, loosen the screws from the 

DIN-Rail clip. 

2.  Place the wall mounting plate on the rear panel of the RNS5/8. 

3.  Use the screws to tighten the wall mounting plate onto the RNS5/8.   

4.  Use the hook holes at the corners of the wall mounting plate to hang the 

RNS5/8 onto the wall. 

5.  To remove the wall mounting plate, reverse the steps above. 

 

 

12