Intel cc2300 Manual De Usuario

 

10

10.  Select “Run System Setup Utility” under the “Utilities” menu.  You will see SSU executables 

installed the first time and then the Server SSU launches. 

11.  In the Available Tasks list select Platform Event Manager and click OK. 
12.  Click the Configure LAN button. 
13.   Enter the following on the BMC LAN Configuration (LAN) dialog box: 

 

Enable LAN Alerts: 

Click to enable BMC LAN-alerts (optional). 

Enter New Password: 

Enter the BMC LAN Configuration password, up to 16 characters (optional). 
Default is NULL.  This will be used for all LAN connections in CSSU, DPC, 
PIC, and BMC LAN-alerts. 

Verify New Password: 

Re-enter the BMC LAN Configuration password (if one is set). 

LAN Access Mode: 

Always Available, which allows DPC and CSSU access via LAN.  (By default, 
LAN access is Disabled.) 

SNMP Community String: 

Public (default) unless there is a predefined SNMP host to receive SNMP 
traps from BMC LAN-Alerts. Must be from 5 to 16 characters. 

IP Configuration: 

Static (default) unless you are using DHCP for IP hosting, then select DHCP. 

Host IP Address: 

Enter the IP address of the server if you are not using DHCP. 

Gateway IP Address: 

Enter the IP address of the router if you are not using DHCP. 

Subnet Mask: 

Enter the subnet mask of the hosts on the subnet if you are not using DHCP. 

Alert IP Address: 

Enter the IP address of the server to receive SNMP traps for the community 
defined with the SNMP Community String. Enter 0.0.0.0 (default) if a 
community is not defined. 

 

14.  Click Save, then Close. 
15.  Exit from the Server SSU. 
16.  Quit the menu. 
17.  Remove the HP Server cc3300 & cc2300 User Information, Diagnostics & Utilities Resource 

CD from the drive. 

18.  Reboot the server.