Gateway E-9722R Manual De Usuario
www.gateway.com
57
8
Reconnect the power cords and turn on the server. The BIOS is reset.
9
Turn off the server, then disconnect the power cords and all other cables connected to
the server.
the server.
10
Follow the instructions in
.
11
Place the jumper back onto pins 1-2.
12
Follow the instructions in
Resetting BIOS passwords
To reset BIOS passwords, you must either reset and clear all BIOS settings, or use the Clear
Password jumper. To reset all BIOS settings, follow the instructions in
Password jumper. To reset all BIOS settings, follow the instructions in
.
To clear the BIOS password(s):
1
Follow the instructions in
. Make sure
that you turn off the server, then unplug the power cord(s) and all other cables connected
to the server.
to the server.
2
Follow the instructions in
.
3
Remove the jumper across pins 1-2 of header J56-A, then place the jumper across pins 2-3.
4
Follow the instructions in
5
Reconnect the power cords and turn on the server. The BIOS password(s) is cleared.
6
Turn off the server, then disconnect the power cords and all other cables connected to
the server.
the server.
7
Follow the instructions in
.
8
Place the jumper back onto pins 1-2.
9
Follow the instructions in
Caution
Moving the jumper while the power is on can damage your server. Always turn off
the server and unplug the power cords and all other cables before changing the jumper.