Brother 0 Manual De Usuario

Descargar
Página de 187
149
Troubleshooting 
9
I want to know the 
necessary port number for 
the security software 
settings. 
wired/ 
wireless
The following port numbers are used for Brother network features:
Network scanning i Port number 54925 / Protocol UDP
PC-FAX RX
 i Port number 54926 / Protocol UDP
Network scanning/printing
, PC-FAX RX
, Remote Setup
i
 Port 
number 161 and 137/ Protocol UDP
BRAdmin Light
 i Port number 161 / Protocol UDP
1
Windows
®
 only.
For details on how to open the port, see the instructions of the security 
software or ask the manufacturer. 
I want to check my network devices are working properly.
Question
Interface Solution
Is your Brother machine, 
access point/router or 
network hub turned on?
wired/ 
wireless
Make sure you have confirmed all instructions in First check the following: 
uu
Where can I find my Brother 
machine's network settings, 
such as IP address?
wired/ 
wireless
Print the Network Configuration Report. See Printing the Network 
Configuration Report
 uu page 63.
How can I check the link 
status of my Brother 
machine?
wired/ 
wireless
Print the Network Configuration Report and check that Ethernet Link 
Status
 or Wireless Link Status is Link OK. See Printing the Network 
Configuration Report
 uu page 63.
If the Link Status shows Link DOWN or Failed To Associate, start over 
again from the First check the following: uu page 144.
Can you “ping” the Brother 
machine from your 
computer?
wired/ 
wireless
Ping the Brother machine from your computer using the IP address or the 
node name.
Successful i Your Brother machine is working correctly and connected 
to the same network as your computer.
Unsuccessful i Your Brother machine is not connected to the same 
network as your computer.
(Windows
®
Ask the network administrator and use the Network Connection Repair 
Tool to fix the IP address and the subnet mask automatically. For the 
detail of the Network Connection Repair Tool, see (Windows
(Macintosh)
Confirm the IP address and the Subnet Mask are set correctly. See 
Confirm the IP address and the Subnet Mask in Is your Brother machine 
assigned with an available IP address?
 uu page 146.
I'm using security software. (continued)
Question
Interface Solution