Axis Communications Network Print Servers Manual De Usuario
Configuration Possibilities
116
AXIS 5500 / AXIS 5550 User’s Manual
4. Set the
PostScript Page Size parameter to LETTER.
5. Set the
PostScript Page Orientation parameter to LANDS.
6. Enter the string
48 0 120 60 30 50 in the PostScript Page Format text field.
7. Enter the string
Helvetica in the PostScript Font text field.
8. Click the
OK button.
Redirecting Print Jobs
when a Printer is Busy
If print data is received for a printer that is already busy, the host
normally must wait. However, if you have an AXIS 5500 it is possible to
use a logical printer to redirect the print data to another logical printer
when the target printer is busy. If the second printer is also busy, the host
must wait until the target printer is ready.
Example:
Follow the instructions below to redirect PR1 print jobs to PR3, when the
printer assigned to PR1 is busy:
1. From the print server’s internal Web page, select
Admin | Logical
Printers.
2. Select the
PR1 tab.
3. Set the
Physical Port parameter to USB1.
1. Set the
Secondary Printer parameter to PR3.
2. Set the
Wait On Busy parameter to NO.
3. Click the
OK button.
4. Select
Admin | Logical Printers and the PR3 tab.
5. Set the
Physical Port parameter to LPT1.
6. Click the
OK button.
Notes:
Hex code
Explanation
48
48 lines per page
0
disable line wrap
120
120 = 12 characters per inch
60
60 = 6 lines per inch
30
30 = 3 mm left margin
50
50 = 5 mm top margin
• The two printers must use the same printer driver.
• Logical Printer redirection cannot be nested. If PR3 is redirected to another logical printer,
the print job will not be redirected if PR3 is busy.
• If both printers are busy, the print job will be printed on the printer that first finishes its
active print job.