Axis Communications Network Print Servers Manual De Usuario

46

AXIS 5500 / AXIS 5550 User’s Manual

This section describes how to continue the installation of the AXIS 

5500/AXIS 5550 in the NetWare environment. Identify which transport 

protocol you are running on your network and which installation method 

you should use. Continue the installation by selecting the appropriate 

installing instructions from the table below:

See “NetWare Administration” on page 71 for information on Novell’s 

administration tools.

If you intend to operate your AXIS 5500/AXIS 5550 in a multi-protocol, 

mixed environment, you should also proceed to the other relevant 

sections in this manual.

NDPS

TCP/IP
IPX/SPX

See “Setup using NDPS” on page 47,
“Public Access Printers” on page 47 and
“Controlled Access Printers” on page 51

iPrint

iPrint over LPR

See “Setup using iPrint” on page 61 and
“Install a printer using AXIS LPR Gateway Configuration Snap-
in” on page 63

iPrint over IPP

See “Setup using iPrint” on page 61and
“Install a printer with AXIS IPP Gateway Configuration Snap-in” 
on page 63

Queue-based 
printing

IPX/SPX
Basic 
Configuration

To install using the AXIS NetPilot Installation Wizard,
see “Basic Setup with AXIS NetPilot” on page 65.

IPX/SPX
Advanced 
configuration 

If you need a more advanced installation that is not covered by 
the AXIS NetPilot Installation Wizard, 
see “Advanced Installation using AXIS NetPilot” on page 67.