Axis Communications Network Print Servers Manual De Usuario

AXIS 5500 / AXIS 5550 User’s Manual

65

Install the AXIS NetPilot software on your computer. AXIS NetPilot runs 

on Windows 98 and Windows NT.

Follow the instructions below to install the AXIS 5500/AXIS 5550 with 

AXIS NetPilot:

1. Start AXIS NetPilot by double-clicking the NetPilot icon, which is located 

in the folder where you installed AXIS NetPilot.

2. Locate the Axis Network Print Server in the ‘New Axis Units’ folder. Select 

it and click the 

Install button on the AXIS NetPilot toolbar. If your network 

is large, it could take a few seconds before the print server appears in the 
folder.

3. Choose the 

with Installation Wizard option.

The AXIS NetPilot Installation Wizard guides you through the installation 

process. The following options are available:

Print Server Name

The default print server name consists of the characters ‘AXIS’ followed 

by the last six digits of the serial number. If you want to change the print 

server name, just type the new name in the available text field.

Environments

Choose which networking environments you want to configure the Axis 

Network Print Server for, e.g. NetWare, TCP/IP, Windows or Macintosh. If 

your network comprises various different platforms, you can enable any 

combination of environments.

NetWare NDS

Place NetWare Print Queues on a specific bindery server, or alternatively 

into an NDS Tree.

The IP address

Choose the method the Axis Network Print Server should employ for 

obtaining an IP address. DHCP, ARP, RARP, BOOTP and Auto-IP are 

supported. You can also select to set the IP address manually. Refer to 

information about setting the IP address.

The number of options varies according to the number of environments you enable.