Cisco Systems 3.3 Manual De Usuario

You can configure the following options on the Access Policy Setup page:

IP Address Filtering—Contains the following IP address filtering options:

Allow all IP addresses to connect—Allow access to the HTML 
interface from any IP address.

Allow only listed IP addresses to connect—Allow access to the HTML 
interface only from IP addresses inside the address range(s) specified in 
the IP Address Ranges table.

Reject connections from listed IP addresses—Allow access to the 
HTML interface only from IP addresses outside the address range(s) 
specified in the IP Address Ranges table.

IP Address Ranges—The IP Address Ranges table contains ten rows for 
configuring IP address ranges. The ranges are always inclusive; that is, the 
range includes the start and end IP addresses. The IP addresses entered to 
define a range must differ only in the last octet (Class C format).

The IP Address Ranges table contains one column of each of the following 
boxes:

Start IP Address—Defines the lowest IP address of the range specified 
in the current row.

End IP Address—Defines the highest IP address of the range specified 
in the current row.

HTTP Port Allocation—Contains the following options for configuring 
TCP ports used for remote access to the HTML interface.

Allow any TCP ports to be used for Administration HTTP 
Access—Allow the ports used by administrative HTTP sessions to 
include the full range of TCP ports.

Restrict Administration Sessions to the following port range From 
Port X to Port Y—Restrict the ports used by administrative HTTP 
sessions to the range specified in the X and Y boxes, inclusive. The size 
of the range specified determines the maximum number of concurrent 
administrative sessions.