CyberPower B1006T Prospecto

Thank you for selecting the CyberPower B1006T Surge 
Protector. The information contained in this brochure explains 
the features and operation of the B1006T. Please take a few 
moments to read this manual.

1. ON/OFF Reset Control Switch and Circuit Breaker 

Controls power to all outlets. The switch is also a 15A breaker. 
When an overload occurs, it will automatically switch off. To 
resume operation, ensure the overload condition is removed 
and reset the surge protector by switching the unit ON.

2. Grounded LED Indicator 

Illuminated when a properly grounded AC outlet is detected.

3. Surge Protected Indicator

Illuminated when the surge protection feature is 
working properly.

4. Safety Covers

All outlets on this surge protector include safety covers. To 
ensure the safety of children and to avoid electric shock and 
damage from a high-dust environment, slide the plastic outlet 
cover over outlets that are not used.

5. Four Wide-Spaced Outlets

Easily plug in large chargers without interfering with the 
other outlets.

6. Protecting Phones/Fax/Modems

To protect your equipment from surge along phones/fax/ 
modems lines.
A. Connect the phone line from wall outlet into the “In” port.
B. Connect the phones/fax/modems line(s) in the “Out” ports.

• Model Number: B1006T
• Outlets: 10 – 4 Transformer Spaced
• Surge Protection: 2850 Joules
• Communication Protection: RJ11 1-In / 2-Out
• Electrical Rating: 125V/15A/1875W
• Maximum Peak Current: 135,000A
• UL Clamping Voltage: UL 1449 3

rd

/330V (L-N), 

400V (L-G, N-G)

• EMI/RFI Filtration: 150 kHz to 100 MHz

TO REDUCE RISK ELECTRIC SHOCK - Use only in dry 
locations and only indoors. DO NOT plug into another relocat-
able power tap. DO NOT “daisy chain” surge protectors. DO 
NOT use with any aquarium equipment. DO NOT use if properly 
grounded outlets are not available. DO NOT install this device if 
there is not at least 10 meters (30 feet) or more of wire between 
the electrical outlet and electrical service panel. This device 
features an internal protection that will disconnect the surge 
protective component at the end of its useful life, but will 
maintain power to the load – now unprotected.

If the ON/OFF is switched off, the 15 AMP circuit breaker may 
have tripped. Examine your connected equipment and remove 
the device that is overloading the circuit. Then, the ON/OFF 
switch back to RESET.

If the Grounded indicator does not light when you plug in the 
surge protector, move the surge protector to a different 
grounded three-prong AC outlet. If it still does not light, return 
the product to the dealer for assistance. If the surge protector 
proves to be working properly, your outlets may not be properly 
grounded and need to be repaired by a professional electrician. 

If the Grounded indicator turns off after a period of use, the 
surge protection has been depleted. Replace your 
surge protector.

If the Protected indicator does not light, the surge protector’s 
AC line is no longer protected from surges. Replace the surge 
protector. The surge protector may have received a power 
surge or spike beyond its specified limits that might overload 
the protection circuitry and make it inactive. The surge 
protector absorbed enough of the surge to protect your 
connected equipment, but it will not protect against future 
surges and spikes.

Please contact our Tech Support department with installation, 
troubleshooting, or general product questions.

• Phone: 1-877-297-6937
• Email: tech@cpsww.com
• Hours of Operation: Monday – Friday, 8:00am – 5:00pm CST

1

2

3

4

5

6