Brocade Communications Systems DCX 8510-4 Manual De Usuario

Brocade DCX 8510-4 chassis removal and replacement

5

   1    1    1   820100   id     N8   Online      FC  F-Port  

10:00:00:05:33:26:0e:65

   2    1    2   820200   id     N8   Online      FC  F-Port  

10:00:00:05:33:48:5e:f5

   3    1    3   820300   id     N8   Online      FC  F-Port  

10:00:00:05:1e:f8:a0:b3

(output truncated)

4. Verify that all the IP address information is correct by entering ipAddrShow and checking the 

results against the IP information recorded in the config-miscinfo.txt file.

switch:admin> ipaddrshow

SWITCH

Ethernet IP Address: xxx.xxx.xxx.12

Ethernet Subnetmask: 255.55.0.0

Fibre Channel IP Address: 1.2.3.4

Fibre Channel Subnetmask: 255.255.255.0

CP0

Ethernet IP Address: xxx.xxx.xxx.10

Ethernet Subnetmask: 255.55.0.0

HostName : cp0

Gateway Address: xxx.xxx.xxx.1

CP1

Ethernet IP Address: xxx.xxx.xxx.11

Ethernet Subnetmask: 255.55.0.0

HostName : cp1

Gateway Address: .1

Backplane IP address of CP0 : 10.0.0.4

Backplane IP address of CP1 : 10.0.0.5

switch:admin>switch:admin>

Reconnecting the system to the network and fabric

See the cable routing information recorded in 

 for the following steps.

Complete the following steps to reconnect the Brocade DCX 8510-4 to the network and fabric.

1. Connect the CP blades to the local area network.

a. Insert the appropriate Ethernet cables into each Ethernet port.

b. Connect the other ends to an Ethernet 10/100 Base-T LAN, if not already connected.

NOTE

The Brocade DCX 8510-4 can be accessed by remote connection using any of the available 
management tools, such as Telnet or Web Tools. Ensure that the Brocade DCX 8510-4 is not 
modified using other connections during the rest of this procedure.

2. Reconnect the transceivers and cables to the port blades: