Brocade Communications Systems 53-1002599-01 Manual De Usuario

Installing the device in a rack or cabinet

2

2. Position the switch in the cabinet, providing temporary support under the switch until the rail 

kit is secured to the cabinet. 

3. Attach the front right bracket to the rail rack using two 10-32 x 5/8 in. screws and the 

appropriate round or square retainer nuts.

4. Repeat 

 to attach the left front bracket to the left front rack rail and tighten all 10-32 x 

5/8 in. screws to a torque of 25 in-lb (29 cm-kg). See 

FIGURE 9

Installing the device in a 2-post rack

5. Proceed to 

 on page 17.

4-Post rack mount installation

Kits for 4-post rack mounting are not included in the shipping carton and must be ordered 
separately.

NOTE

Use the following procedure when installing the Brocade ICX 6650 device in a 4-post rack cabinet. 
For 2-post cabinets, follow the procedures in the section