Siemens Software version syngo CT 2005C Manual De Usuario
Workflow Information
39
How to Create your own
Scan Protocols
There are two different ways to modify and create your
scan protocols:
scan protocols:
Edit/Save Scan Protocol
If you want to modify an existing protocol or create a
new one, e.g., you want to have two “AbdomenRou-
tine-Protocols” with different slice width, we recom-
mend to do this directly on the Examination card.
new one, e.g., you want to have two “AbdomenRou-
tine-Protocols” with different slice width, we recom-
mend to do this directly on the Examination card.
User-specific scan protocols can be saved with the fol-
lowing basic procedure:
lowing basic procedure:
• Register a patient, you can choose any patient posi-
tion in the “Patient Model Dialog“.
• Select an existing scan protocol in the “Patient Model
Dialog”.
• Modify the scan protocol, change parameters, add
new ranges etc., so that the new protocols fit your
needs.
needs.
• Scan your patient as usual.
• Check if all parameters are as you desire.
• Select Edit/Save Scan Protocol in the main menu.
• Select the folder where you want the new protocol to
• Check if all parameters are as you desire.
• Select Edit/Save Scan Protocol in the main menu.
• Select the folder where you want the new protocol to
appear and the scan protocol name in the pop-up
dialog.
dialog.
• You can either use the same name to overwrite the
existing scan protocol, or enter a new name, which
will create a new protocol name and will not alter
any of the existing protocols already stored.
will create a new protocol name and will not alter
any of the existing protocols already stored.
C2-025.630.01.01.02_APPLICATIONGUIDE_SPIRIT.book Page 39 Friday, April 8, 2005 9:55 AM