Cisco Systems 1080P12X Manual De Usuario

Cisco TelePresence PrecisionHD Camera

PrecisionHD Camera User guide

D14640.09 PrecisionHD 1080p-720p Camera User Guide, June 2012.

www.cisco.com

The VISCA™/RS–232 control protocol, cont...

Camera commands,

continued...

NOTE:

Some VISCA™ commands do not apply to the PrecisionHD 1080p4x/4xS2 cameras.

Do not apply to PrecisionHD 4x/4xS2 cameras

Command

Command Packet

Comments

Mirror_On

8x 01 04 61 02 ff

Sony calls this CAM_LR_Reverse.

RR (FT/AT mirror command).
The “xConfiguration Cameras

Camera [1..n] Mirror: Auto”

(supported by the Codec C-series)

do not apply to the PrecisionHD

1080p 4x.

Mirror_Off

8x 01 04 61 03 ff

Flip_On

8x 01 04 66 02 ff

Sony calls this CAM_ImgFlip.
The “xConfiguration Cameras

Camera [1..n] Flip: Auto” (supported

by the Codec C-series) do not

apply to the PrecisionHD 1080p 4x.

Flip_Off

8x 01 04 66 03 ff

Gamma_Auto

8x 01 04 51 02 ff

Gamma mode. Default uses

gamma table 4.

Gamma_Manual

8x 01 04 51 03 ff

Gamma_Direct

8x 01 04 52 0p 0q 0r

0s ff

pqrs: Gamma table to use in

manual mode. Range 0-7.

MM_Detect_On

8x 01 50 30 01 ff

Turn on the Motor Moved

Detection (camera recalibrates if

touched)

MM_Detect_Off

8x 01 50 30 00 ff

Turn off the Motor Moved

Detection (camera does not

recalibrate if touched)

Call_LED_On

8x 01 33 01 01 ff

Refers to orange LED on top of

camera. Will always be off at

startup.

Call_LED_Off

8x 01 33 01 00 ff

Call_LED_Blink

8x 01 33 01 02 ff

Power_LED_On

8x 01 33 02 01 ff

Green power LED. If switched to

off and stored to startup profile, it

will always be off.

Power_LED_Off

8x 01 33 02 00 ff

Command

Command Packet

Comments

IR_Output_On

8x 01 06 08 02 ff

See IR push message.

IR_Output_Off

8x 01 06 08 03 ff

IR_CameraControl_

8x 01 06 09 02 ff

Lets up/down/left/right/zoom+/-

on the IR remote control the

camera directly. Those keycodes

will be sent to the controller if IR

Output is on.

IR_CameraControl_

Off

8x 01 06 09 03 ff

Command

Command Packet

Comments

Zoom_Stop

8x 01 04 07 00 ff

Zoom_Tele

8x 01 04 07 2p ff

p = speed parameter,

a (low) to b (high)

Zoom_Wide

8x 01 04 07 3p ff

Zoom_Direct

8x 01 04 47 0p 0q 0r

0s ff

pqrs: zoom position

ZoomFocus_Direct

8x 01 04 47 0p 0q 0r
0s
0t 0u 0v 0w ff

pqrs: zoom position
tuvw: focus position

Focus_Stop

8x 01 04 08 00 ff

Focus_Far

8x 01 04 08 2p ff

p = speed parameter,

a (low) to b (high)

Focus_Near

8x 01 04 08 3p ff

Focus_Direct

8x 01 04 48 0p 0q 0r

0s ff

pqrs: focus position

PTZF - movement commands

Contents

Appendices

Introduction

The physical interface

Connecting the camera

Video output formats

Daisy chaning

Appendices