Cisco Systems 3750E Manual De Usuario

13-32

Catalyst 3750-E and 3560-E Switch Software Configuration Guide

OL-9775-02

Chapter 13 Configuring VLANs

Configuring VMPS

Changing the Reconfirmation Interval

VMPS clients periodically reconfirm the VLAN membership information received from the VMPS.You
can set the number of minutes after which reconfirmation occurs.

If you are configuring a member switch in a cluster, this parameter must be equal to or greater than the
reconfirmation setting on the command switch. You must also first use the rcommand privileged EXEC
command to log in to the member switch.

Beginning in privileged EXEC mode, follow these steps to change the reconfirmation interval:

To return the switch to its default setting, use the no vmps reconfirm global configuration command.

Changing the Retry Count

Beginning in privileged EXEC mode, follow these steps to change the number of times that the switch
attempts to contact the VMPS before querying the next server:

To return the switch to its default setting, use the no vmps retry global configuration command.

Command

Purpose

Step 1

configure terminal

Enter global configuration mode.

Step 2

vmps reconfirm minutes

Enter the number of minutes between reconfirmations of the dynamic
VLAN membership. The range is 1 to 120. The default is 60 minutes.

Step 3

end

Return to privileged EXEC mode.

Step 4

show vmps

Verify the dynamic VLAN reconfirmation status in the Reconfirm Interval
field of the display.

Step 5

copy running-config startup-config

(Optional) Save your entries in the configuration file.