Cisco Systems ASA 5505 Manual De Usuario
4-7
Cisco ASA 5505 Adaptive Security Appliance Hardware Installation Guide
OL-18362-01
Chapter 4 Maintenance and Upgrade Procedures
Upgrading Memory
This section describes how to remove and install the memory module on the adaptive security appliance.
This section includes the following topics:
This section includes the following topics:
•
•
Removing the DIMM
To remove the memory module, perform the following steps:
Step 1
Determine the location of the memory sockets, see
.
Figure 6
System Memory Location in the Cisco ASA 5505
Step 2
Locate the wrist grounding strap and connect one end to the adaptive security appliance, and securely
attach the other to your wrist so it contacts your bare skin. See,
attach the other to your wrist so it contacts your bare skin. See,
more information.
Note
Handle the edges of the DIMM only; avoid touching the memory modules, pins, or traces (the
metal fingers along the connector edge of the DIMM), along the connector edge.
metal fingers along the connector edge of the DIMM), along the connector edge.
1
DIMM
2
CompactFlash
3
Battery
1
3
2
281045