Cisco Systems 815 Manual De Usuario
Chapter 1 Overview
Front Panel LEDs
1-6
Cisco 815 Integrated Services Router Hardware Installation Guide
OL-9558-01
Use the back panel LEDs during router installation to confirm that you have
correctly connected all the cables to the router.
correctly connected all the cables to the router.
Front Panel LEDs
Use the router front panel LEDs to determine network activity and status on the
Ethernet port and on the WIC ports. The front panel LEDs are shown in
Ethernet port and on the WIC ports. The front panel LEDs are shown in
.
Table 1-3
Back Panel LEDs
LED Label
Color
Description
WIC0 OK
Green
On when the WIC is correctly installed in the card slot.
There are 2 LEDS associated with the WIC-4ESW: The right
LED, which is labeled LNK, and the left LED, which is
labeled ACT. The LNK (physical layer link) LED is on when
the Cisco IOS software recognizes the switch and the
connection is up. The ACT (activity) LED indicates that data
is being transmitted or received on the slot.
LED, which is labeled LNK, and the left LED, which is
labeled ACT. The LNK (physical layer link) LED is on when
the Cisco IOS software recognizes the switch and the
connection is up. The ACT (activity) LED indicates that data
is being transmitted or received on the slot.
FDX
Green
On solid—Ethernet port is operating in full-duplex mode.
Off—Ethernet port is operating in half-duplex mode.
100
Green
On solid—Ethernet port is operating at 100 Mbps.
Off—Ethernet port is operating at 10 Mbps.
LINK
Green
On when the Ethernet link is up.
MOD OK
Green
On when the VPN hardware encryption module is installed
and recognized by the Cisco IOS software.
and recognized by the Cisco IOS software.
WIC1 OK
Green
On when the WIC is correctly installed in the card slot.