Jenn-Air W10418360A Manual De Usuario
8
Start or Resume a Cycle
■
Run hot water at the sink nearest your dishwasher until the
water is hot. Turn off water.
water is hot. Turn off water.
■
Select the wash cycle and options desired OR press
START/RESUME to repeat the same cycle and
options as in the previous wash cycle. Press START/
RESUME once to show which selections you used,
the press START/RESUME again to start the cycle.
START/RESUME to repeat the same cycle and
options as in the previous wash cycle. Press START/
RESUME once to show which selections you used,
the press START/RESUME again to start the cycle.
IMPORTANT: If anyone opens the door (such as, adding a dish,
even during the Delay Hours option), the START/RESUME button
must be pressed each time.
even during the Delay Hours option), the START/RESUME button
must be pressed each time.
■
If the START/RESUME button is located on top of door: Push
door firmly closed within 3 seconds of pressing START/
RESUME. If the door is not closed within 3 seconds, the start
button LED will flash, an audible tone will be heard, and the
cycle will not start.
door firmly closed within 3 seconds of pressing START/
RESUME. If the door is not closed within 3 seconds, the start
button LED will flash, an audible tone will be heard, and the
cycle will not start.
Cycle and Option Descriptions
This information covers several different models. Your dishwasher may not have all of the cycles and options described.
Wash times depend on water temperature, heavy soil condition, dish load size and options selected. Adding options will add time to the
cycle.
cycle.
*Adding options will add time to the cycle. See options information section.
**This is the approximate cycle time obtained with 120°F (49°C) hot water available at the dishwasher. Increase in time results from low
temperature of the incoming water.
STEP 4
CYCLE SELECTIONS
CYCLES
SOIL LEVEL
WASH TIME* (MINS.)
W/O OPTIONS
WATER
USAGE
USAGE
GALLONS
(Liters)
Typical**
Max
The most advanced and versatile cycle. Sensor Wash
cycle senses the load size, soil amount, and toughness
of soil, to adjust the cycle for optimal cleaning using
only the amount of water and energy needed.
Throughout the cycle, the wash will repeatedly pause
adjusting for optimal wash action and sensing.
cycle senses the load size, soil amount, and toughness
of soil, to adjust the cycle for optimal cleaning using
only the amount of water and energy needed.
Throughout the cycle, the wash will repeatedly pause
adjusting for optimal wash action and sensing.
Light to Medium
110
150
4.2 (16.1)
Tough/Baked-
On
125
190
5.0 (19.1)
Heavy
125
190
6.8 (25.8)
Use for hard-to-clean, heavily soiled pots, pans,
casseroles, and regular tableware. This cycle combines
tough wash action, longer wash time and higher wash
temperatures to remove the tough soils.
casseroles, and regular tableware. This cycle combines
tough wash action, longer wash time and higher wash
temperatures to remove the tough soils.
Light to Medium
130
150
5.0 (19.1)
Heavy/Baked-
On
140
205
6.8 (25.8)
Use for loads with normal amounts of food soil. The
energy-usage label is based on this cycle.
energy-usage label is based on this cycle.
Light to Medium
110
150
4.0 (15.0)
Heavy
125
190
6.8 (25.8)
Use for lightly soiled items or china and crystal.
Light to Medium
105
145
4.2 (15.2)
Heavy/Baked-
On
120
185
6.8 (25.8)
When you need fast results, the 1 Hour Wash will clean
dishes using slightly more water and energy. Select the
Precision Dry™ or Precision Dry+™ option to speed
drying times (add approximately 27 to 35 minutes to
the 1 Hour Wash cycle).
dishes using slightly more water and energy. Select the
Precision Dry™ or Precision Dry+™ option to speed
drying times (add approximately 27 to 35 minutes to
the 1 Hour Wash cycle).
All soil levels
58
62
7.9 (30.0)
Use for rinsing dishes, glasses, and silverware that will
not be washed right away.
not be washed right away.
Do not use detergent.
All soil levels
17
20
2.4 (9.0)