Dacor DDW24S Manual De Usuario

Installation Instructions

Verify the Package Contents

•  Remove all styrofoam and plastic wrap from the 

dishwasher. Be sure to remove the toe kick from 

the top of the dishwasher packaging. With the 

assistance of at least one person, remove the 

dishwasher from the shipping pallet. Place the 

unit to the side of the cabinet opening. 

NOtE: 

Since each dishwasher is tested at the factory 

for proper operation, there may be some residual 

water inside the unit, the water supply line or 

drain hose.

•  Remove the “O” ring attached to the water line 

in a plastic bag. Set it aside for use during the 

Water Line Connection.

•  Remove all of the packing materials from inside 

and outside of the unit. 

DO NOt allow any of 

the shipping materials, loose screws or plastic to 

remain inside. 

•  Verify that all required components have been 

provided. Inspect the unit for shipping damage 

(including cosmetic damage). If any item is 

missing or damaged, please contact your 

dealer immediately. Do not install a damaged or 

incomplete appliance.

Toe kick
Mounting hardware  

(2 screws, 2 spacers)
Plastic feet (3) 
O ring (comes attached to the water line)
Product literature

Level
Crescent wrench
Wire strippers (permanent electrical 

connections only)
Flat blade screwdriver
Phillips screwdriver (#2)
Tape measure
Electric drill with 1 1/2” and 2” drill bits

Hose clamp (select the correct size clamp for 

the drain connection...see facing page).

Additional hose and clamps may be required for 

installation of an air gap according to local code.
Make sure you have everything necessary for proper 

installation before proceeding.