KitchenAid 5KSB555AWH Manual De Usuario

The various speeds of the blender are maintained 
under varying load conditions with a hall effect
sensor (20), located at the bottom of the motor (17).

To remove the hall effect sensor (20), use a flathead 
screwdriver to open two tabs (21) that hold the hall 
effect sensor (20) to the motor (17). Disconnect 
connector (12) from the control board (9).

Always test the unit for proper operation after you have 
completed a service procedure.

WARNING

Always check the blender for the presence of soil 
from earlier food preparation and clean it before 
repackaging. The blender power base and lid can be 
cleaned with a mild soap solution applied to a damp 
cloth and wiped dry with a soft towel. The blender jar 
can easily be cleaned by placing it in an automatic 
dishwasher.

You can also fill the jar half full of warm water and add a 
few drops of liquid dishwasher detergent. Cover the jar 
and blend the mixture in the “STIR” position for 10 - 20 
seconds. Shut the blender off and unplug the unit from 
the AC outlet. Rinse the blender jar with clean water 
and dry with a clean towel.